To compare the cost of our complete single person kayak kits
to those of other kit manufacturers add approx. $263.00 Cdn /
$225.00
US funds to their full kit prices. This would be the cost
of components we include for which others charge extra.
Building times, Costs, and Weights:
Keep in mind when you’re comparing building times, costs, and
weights, that our
kits include more components than other kits. The weight listed for
each model reflects the extra hardware we include for the finished product
opposed to other kit providers. Our boats will take
no more time to build and will be no heavier than the others (in most cases our hulls will be
faster to build). Other kit manufacturers only quote building times for
the basic boat. Our building times, costs, and weights include all the time and
components for the finished boat.
Our kits
come complete with:
* - A
comprehensive manual with approximately 150 photographs and
diagrams.
* - All the
CNC router pre-cut hull and deck parts which are made from 4mm
BS1088 Lloyds rated marine Okoume mahogany plywood; the best
quality available. And bulkheads both permanent and temporary
are supplied
* - Epoxy
resin with U. V. stabilized clear coating non blushing hardener
and metering pumps,
* -
Fiberglass cloth and tapes as required
* - An
adjustable seat that is so comfortable that it rivals any of the
production boats molded seats.
* -
Adjustable foot braces
* - Hatches,
self aligning hatch covers with neoprene rubber hatch seals, We
even give you the dimensions for the lengths to cut the webbing
strips used to secure the hatch covers.
* - Deck
hardware, paddle park, bow/stern handles, webbing for hatches,
all stainless steel nuts, bolts, and washers,
* - 2015
flagship varnish
* - Graphite
to make the bottom of your kayak wear like steel
* - Rubber
gloves, small glue brushes, squeegee, mixing tubs and syringes,
stir sticks are also included
All product
specifications may change without notice
Extra
things not included in the kit that we recommend you get:
*- a small
slow hardener (5 to 1 ratio) to be use in the application of the
graphite.
*- Five High
density 3mm nap foam rollers,( 9-1/2" long with 1/8" thick foam
they have a plastic core so they last longer than the ones with
a cardboard center. The foam rollers are to be cut with a hack
saw into 3 equal length.). We also supply the 3" roller handle
| Kit Options:
Standard Opening |
 |
The pieces C2A and C2B are included with
all kits as the standard opening.
|
Cockpit Opening with Knee Braces |
|
|
 |
The knee brace pieces, C3A and C3B, are an extra. They
would replace pieces C2A and C2B. |
|
